Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration work we handle
See the difference
Before
After
Before
After
Before
AfterMold Removal in San Antonio, TX
Mold removal in San Antonio means physically taking mold off surfaces: scrubbing it from drywall, cutting out contaminated materials, and treating surfaces so spores don’t return. It’s one part of the broader Mold Remediation in San Antonio process, which also fixes the moisture that let mold grow in the first place.
At Marsh Water Damage San Antonio, we handle Mold Remediation as a controlled job, not a quick wipe-down. We set containment before we touch anything, we run HEPA air filtration, and we bag contaminated material so spores don’t spread through your house. If you see mold on a wall, a ceiling, or along baseboards, call us at (325) 252-3917. We’ll tell you what it will take, in writing, before any work starts.
When You Need Mold Removal
Most San Antonio homeowners call us for Mold Inspection & Testing after seeing mold in one of these situations:
- After a leak that sat wet for more than 48 hours. A slow drip under a sink, a roof leak that soaked drywall, or a dishwasher hose that leaked behind cabinets. Mold starts establishing long before you see it.
- After flooding or a water heater failure. When water sat in carpet or behind baseboards in neighborhoods like Alamo Heights, Stone Oak, or King William, mold often shows up within a week or two.
- Musty smell with no visible source. That earthy, damp odor in a closet, bathroom, or garage usually means mold is growing where you can’t see it: inside a wall cavity, under flooring, or behind a vanity.
- Visible staining on ceilings, walls, or baseboards. Black, green, or gray spots, especially if they keep coming back after cleaning. That pattern means moisture is still present.
- After a previous water damage repair that wasn’t dried fully. We regularly get calls from homeowners in San Antonio who had a “fix” six months ago and now see mold in the same spot. The water was stopped, but the drying wasn’t finished to the right standard.
- Health concerns that improve when you leave the house. Persistent coughing, sneezing, or headaches that ease when you’re away from home can be tied to airborne mold. Our removal process includes HEPA air filtration to reduce exactly that kind of exposure.
Our Mold Removal Process
Here’s what happens when we handle a mold removal job in San Antonio. Every step is standard, not optional.
- Containment setup. We seal off the affected area with plastic sheeting and create negative air pressure, so mold spores can’t drift into the rest of your house during removal.
- HEPA air filtration. We run commercial HEPA air scrubbers inside the containment area. These pull airborne spores out of the air continuously while we work.
- Physical removal of contaminated material. Porous materials like drywall, insulation, or carpet pad that are colonized by mold get cut out and double-bagged in sealed plastic for disposal. We don’t paint over mold or spray it with bleach; we remove it.
- Surface treatment and cleaning. Non-porous surfaces (studs, framing, concrete, tile) get wire-brushed, HEPA-vacuumed, and treated with an antimicrobial agent registered for the material type.
- Drying to the right standard. We take moisture readings with professional meters and run drying equipment from brands like Dri-Eaz and Injectidry until the structure reads dry, not just dry to the touch. Mold can regrow in days if hidden moisture remains.
- Post-removal verification. We do a final visual inspection and moisture check so you know the job was done right. And you get the 365-Day Done Right Promise in writing: if the repair is not right within a full year, we make it right, including a free second visit.
A note on safety: mold removal stirs up spores by its nature. That’s why we wear proper respirators, use containment, and run HEPA filtration. If you’re tempted to tackle a big patch yourself, know that opening walls or pulling trim without containment can spread spores through the whole house. A trained remediation team, like ours with home restoration experience since 2005, is the safer call for anything beyond a small bathroom spot.
Mold Removal Pricing in San Antonio
What does mold removal cost in San Antonio? Most small, contained jobs (a bathroom wall, a closet ceiling, a section of baseboard) run between $500 and $1,500. Jobs involving multiple rooms, interior wall cavities, crawl spaces, or an active moisture source run $2,000 to $6,000+. The range reflects real differences in the size and type of work, not padding.
What Affects the Price
- Square footage of affected area. A single wall plate vs. an entire bedroom with closet space.
- What material the mold is on. Drywall removal is cheaper than carpet pad and trim replacement, which is cheaper than hardwood flooring or structural wood.
- How far the moisture spread. If the source was an AC condensate line in the attic that dripped across three ceiling joists, the containment and drying work grows.
- Accessibility. Crawl spaces and tight attics in older San Antonio homes take longer and cost more to work in safely.
- Whether the moisture source is still active. If the leak is not fixed, removal alone is wasted money. We’ll tell you if the source needs to be addressed first.
Every job gets a written price before any work starts. No estimate that balloons after demo begins, no after-the-fact surprises. If you want an exact number for your house, call (325) 252-3917. Estimates are free, and a live person answers 24/7.
FAQs – Mold Removal
How much does mold removal cost in San Antonio?
Small contained mold removal jobs in San Antonio typically run $500 to $1,500, while larger multi-room or crawl space jobs run $2,000 to $6,000 or more, depending on material type and how far moisture spread. For an exact quote on your home, call (325) 252-3917 for a free estimate with a written price before any work starts.
Is mold removal the same as mold remediation?
Mold removal is the physical step of taking mold off surfaces and out of building materials, while Mold Remediation is the larger process that also includes finding and fixing the moisture source, containing spores, drying the structure, and verifying the job. Removal is part of remediation, but remediation without proper removal just kicks the problem down the road.
Can you remove mold the same day you come out?
In many cases, yes. Smaller jobs can often be started and finished the same day we assess the area, depending on the extent of contamination and whether the moisture source is still active. Call (325) 252-3917 and we’ll tell you what’s realistic for your situation, not a generic timeline.
Is it cheaper to remove mold myself?
For a tiny patch on tile, maybe. For anything on drywall, behind trim, or larger than a dinner plate, the risks of DIY removal (spore spread, incomplete drying, hidden moisture, regrowth) usually cost more in the long run than professional removal with containment and HEPA filtration. We’d rather you call us and get a straight answer than find out three months later that the mold came back.
Written by Tobias Reyner, Owner at Marsh Water Damage San Antonio, serving San Antonio.